Diagram Of Parts - Yamaha YTS-V1100 Manuel D'installation

TV attachment bracket for SURROUND SOUND TV Stand YRS-1000 and YRS-2000 TV attachment bracket for SURROUND SOUND TV Stand YRS-1000 and YRS-2000
This product is a TV attachment bracket for the SURROUND SUND TV STANDS YRS-1000 and YRS-2000.
This product can be used to mount televisions with the following mounting dimensions.
*Even if your TV would fit according to the following dimensions, if there are projections on the back of
the TV or if its vents would be blocked, it will not be possible to mount it, so please carefully check the
installation guide for your TV before proceeding.
Also, please note that the bracket is designed for TVs equivalent to the 47''V, so please do not use it for
TVs that are any larger or heavier.
Usable if mounting holes are positioned at:
200(W)x200(H),300x200,300x300,400x200,400x300,400x400,500x200(mm)
●The installation of this TV attachment bracket demands
carefully performed work, so please take great care in terms
of safety during the installation. Please read this installation
manual carefully prior to starting the assembly and installa-
tion work.
Yamaha shall not bear any responsibility for any accidents or
injury that occur due to careless assembly, installation or use
of this product.
●Install this hardware in the specified place. Also, be sure to
take the measures indicated for preventing the unit/your TV
from falling over.
●For the sake of your own safety, make sure that the place
you wish to position your TV is sturdy enough to support the
TV, the rack and the TV attachment bracket.
YTS-V1100 YTS-V1100
Installation Guide Installation Guide
Thank you for purchasing this product.
●Be sure that each part of the installation is performed by two
or more people.
●Be sure to use all of the screws and/or mounting hardware
indicated in the installation guide.
●This installation guide provides explanations of important
precautions to take to avoid any accidents, as well as how to
assemble and install the TV attachment bracket.
During the installation, please refer to this installation guide in
conjunction with the user's manuals for your TV and TV rack
and attain a good understanding of them before proceeding
according to their directions.
●After reading, please keep this guide in a safe place for
future reference.

Diagram of Parts

Support Column Mounting
Screws A (M6 x 16): 2
Support Column Mounting
Screws B (M6 x 35): 2
Plastic Ties: 1
Auxiliary Support: 1
1 En
TV Mounting Screws
TV Mounting Bracket
Screws C (M5 x 20): 6
F M5×16)
Mounting Adaptor
Screws D (M6 x 16): 4
G M6×14)
H M6×20)
Tie Base: 1
I M8×20)
*The screws may differ
Auxiliary Support Mounting
depending on the TV used
Screws E (M5 x 12): 3