Domo DO9103W Mode D'emploi page 38

DO9103W - DO9104W
When the weight has stabilized, the numbers on the display will start to flash. The
weight will be displayed during a few seconds. the scale will automatically switch off
after a few seconds when it is not being used.
WEIGHING WITH BLUETOOTH CONNECTION
go to the app store and download the iFit application 'iFit scale'.
step onto the scale to turn it on. the display of the scale will light up
and the appliance is now ready to be connected with your ipod touch,
iphone or ipad.
go to the settings of your ipod touch, iphone or ipad and set up a Bluetooth connection
with your iFit scale:
1. go to settings > general > Bluetooth.
2. if Bluetooth is switched off, turn it on by
sliding the button next to 'Bluetooth' to
the right.
3. Make sure that the iFit scale is turned on.
4. select 'iFit scale' in the list of devices to
connect to the scale. You can now start
weighing according to the manual.
From now on your apple device is also
linked to the iFit scale. to remove this
link, select 'iFit scale' in the 'Devices' list
and press 'Forget this device'.
Note:
•
•
•
open the iFit application.
You now see the user screen.
Select a user or create a new user profile by pressing the + in the upper right corner.
Make sure that the scale is turned on when you want to set up the
connection.
the connection between your apple device and your iFit scale will
hold within a radius of 5 to 10 metres.
Make sure that only 1 apple device at a time is connected to the
scale.
38