LaserLiner DampFinder Compact Mode D'emploi page 16

Information on maintenance and care
Clean all components with a damp cloth and do not use
cleaning agents, scouring agents and solvents. Remove the
battery(ies) before storing for longer periods. Store the
device in a clean and dry place.
Calibration
The meter needs to be calibrated and tested on a regular
basis to ensure it produces accurate measurement results.
We recommend carrying out calibration once a year.
Technical data
Measurement principle
Materials
Accuracy
Nominal temperature
Operating conditions
Storage conditions
Power supply
Battery service life
Dimensions (W x H x D) 58 mm x 155 mm x 38 mm
Weight (incl. batteries) 183 g
Auto power off
Technical revisions reserved. 17W48
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according
to the European Directive on waste electrical
and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=dafico
16
EN
Resistive material moisture
measurement by way of
integrated electrodes
102 types of wood,
8 building materials
Wood: ± 1% (5%...30%)
± 2% (<5% and >30%)
Building materials: ± 0.15%
(0%...10%)
22°C
0°C...40°C, Max. humidity 85% rH,
no condensation, Max. working
altitude 2000 m above sea level
-10°C...70°C, Max. humidity 85% rH
4 x 1.5 V type AAA
Approx. 700 hours
after 3 minutes