Specifications - Harman AKG D12 VR Mode D'emploi

Specifications

5 Specifications
Transducer Principle:
Polar Pattern:
Frequency Range:
Sensitivity at 1000 Hz passive:
Electrical Impedance at 1000 Hz:
Recommended Load Impedance:
Maximum SPL for 0,5 % THD:
Climatic Conditions:
Connector Type:
Connector Wiring:
Housing Material:
Finish:
Dimensions (H x W x D):
Weight:
This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of
the Declaration of Conformity, visit http://www.akg.com or contact sales@akg.com.
Frequency Response Curve
16
dynamic pressure gradient transducer
cardioid
17 - 17.000 Hz (±2 dB)
1,2 mV/Pa ± -58 dBV
< 200 Ohm
> 1.000 Ohm
164 dB SPL
temperature range: -10 °C - +70 °C
relative humidity at +20 °C: 90 %
three-pin male standard XLR
pin 1: ground pin
pin 2: AF (in phase)
pin 3: AF (out phase)
metal
front grille: glossy galvanized nickel matte,
rear grille: matte black paint
125 mm x 101 mm x 66 mm
500 g
Polar Pattern
D12 VR