Cleaning The Register - Helios AIR1-KR DX Série Notice De Montage Et D'entretien

Installation and Operating Instructions
Cooling register AIR1-KR DX
3 .2

Cleaning the register

– It is recommended to check the DX cooling register
The cooling register must be regularly checked for dirt and dust deposits. If there is dirt and dust on the cooling
–
register, these can be removed with water.
– The cleaning can be carried out with water. Household cleaning agents can be used.
– Do not bend the fins!!
– When cleaning, ensure that the cooling register is not damaged mechanically or chemically
Allow the cooling register to dry before installation
1. Loosen screws (see Fig
2. Carefully remove the cooling register (see Fig
for contamination every 6 months
!
. 25).
Fig .25
. 26).
Fig .26
16
.
.