Helios AIR1-KR DX Série Notice De Montage Et D'entretien page 26

Installation and Operating Instructions
EN
Cooling register AIR1-KR DX
2. Remove the temperature sensor from the marked position in the supply air duct of the AIR1 unit (see Fig. 10).
3. Insert the temperature sensor on the supply air side of the cooling register and fasten to the metal bracket with a
cable tie (see Fig. 11).
4. Attach the cooling register to the unit. Connect the free temperature sensor plug from the unit to the cooling register
(see Fig. 12).
Fig .12
9
Fig .10
Fig .11