Installation and Operating Instructions
CHAPTER 3
SERVICE AND
MAINTENANCE
m
WARNING
Cooling register AIR1-KR DX
3 .0
Service and maintenance
Cleaning and maintenance work may only be carried out by an electrician.
m
Danger to life!
The AIR1 unit must be fully isolated from the mains power supply before all maintenance and installation work!
Danger of electric shock, moving parts (fans) and potentially hot surfaces of optional auxiliary heating registers .
3 .1
Cleaning the condensate tray
The condensate tray must be cleaned every 6 months
3 .1 .1 Cooling register DX for AIR1 XC units
1. The condensate tray is located in the lower panel of the cooling register. Loosen the screws and remove the panel
(see Fig. 21). Carefully remove the panel because residual water may still be present.
2. Clean the condensate tray with a cloth (see Fig. 22).
3 .1 .2 Cooling register DX for AIR1 XH and RH units
1. Loosen and remove the screws to remove the service door (see Fig
2. Clean the condensate tray with a cloth (see Fig
Fig .21
Fig .22
. 24).
15
. 23).
Fig .23
Fig .24