Cooling Register Dx For Air1 Xc Units; Cooling Register Dx For Air1 Xh And Rh Units - Helios AIR1-KR DX Série Notice De Montage Et D'entretien

Installation and Operating Instructions
NOTE
Cooling register AIR1-KR DX
When using the cooling register below, the corresponding AIR1 XC unit must be suspended lower from the ceiling (see
table, Fig. 7).
– for ventilation units AIR1 XH and RH
When installing the unit, the following criteria must be observed when installing the unit to ensure easy accessibility for
maintenance and maintenance work (Fig. 8).
A: Minimum distance for servicing the cooling register.
– Ensure that the multi-leaf dampers are installed for frost protection .
– Cooling registers XH and RH are only suitable for outdoor installation in combination with the corresponding
weather protection covers AIR1-AAD KR KW and DX!

2 .1 .1 Cooling register DX for AIR1 XC units

1. The cooling register has 4 mounting brackets for installation (see Fig. 9). Suspend the cooling register with these
mounting brackets using the rubber dampers. Before suspension, apply sealing strips where the cooling register is
joined together with the AIR1 unit.
H

Type
AIR1-KR DX XH 1000
AIR1-KR DX XH 1500
AIR1-KR DX XH 2500
AIR1-KR DX XH 3500
AIR1-KR DX XH 4500
AIR1-KR DX XH 5500
AIR1-KR DX XH 7000
AIR1-KR DX XH 8500
Fig .9
8
Fig .7
Type H (mm)
AIR1-KR DX XC 700
AIR1-KR DX XC 1400
Fig .8
A (mm) Type A (mm)
985 AIR1-KR DX RH 1500 960
995 AIR1-KR DX RH 2000 1060
1215 AIR1-KR DX RH 3000 1170
1375 AIR1-KR DX RH 5000 1440
1425 AIR1-KR DX RH 6000 1560
1635 1810
AIR1-KR DX RH 8000
1935 1910
AIR1-KR DX RH 9500
2285 2060
AIR1-KR DX RH 12000
AIR1-KR DX RH 15000 2310
EN
35
40