Track Repeat - Renkforce CD-1000 Mode D'emploi

(7) Button fast forward 66/66 c
Every time this button is pushed, the player will jump to the next track.
If you keep this button pushed, you can search for specific passages of a song.
(8) Rewind button c 44/44
Every time this button is pushed, the player will jump to the last track.
If you keep this button pushed, you can search for specific passages of a song.
(9) MEMORY button
This button is used to programme a track sequence.
(10) REPEAT button
This button activates the repeat function.
(11) Button MEM CLEAR
Push this button to delete the track sequence memory.
(12) INTRO button
This button activates the track sampling function.
a) Playing a CD
• Turn on the CD player with the POWER button (1).
• Switch on the amplifier and select the CD input.
• Push the OPEN/CLOSE button (3) and put a CD on the CD tray (2) with the printed side facing up-
wards.
• Push OPEN/CLOSE button (3) again. The CD tray (2) will retract.
• Push the PLAY/PAUSE button 6/3 (5) to start the playback.
• To briefly interrupt playback, push the button PLAY/PAUSE 6/3 (5).
• To stop playback, push the button STOP 5 (6).
b) Track Repeat
• Push the button REPEAT (10) once to continually repeat the current track.
• Push the button REPEAT (10) twice to continually repeat the entire CD.
• Push the button REPEAT (10) thrice to switch off this function.
26