Mains Connection - Renkforce CD-1000 Mode D'emploi

b) Mains Connection
Before plugging in the mains plug, ensure that the device voltage indicated at the device cor-
responds to the available mains voltage. Do not connect the device if the indication does not
correspond to the available mains voltage. Wrong supply voltage will cause serious damage.
Be careful when handling mains cables and mains connections. Mains voltage may cause po-
tentially fatal electric shock.
The mains socket to which the device is connected must be easily accessible so that it can be
quickly separated from the mains voltage in case of an error.
The CD player and all connected devices must be switched off when the power supply is con-
nected.
Make sure that no cables lie around openly. Install cables professionally to prevent accidents.
Make sure that all electrical connections and connection cables between the different devices
and any extension cables comply with the regulations and the operating instructions. If an ex-
tension line is used, ensure that it is designed for the respective load.
• Connect the mains plug of the CD player to a socket (230 V/50 Hz) of the public mains supply.
24