Operation - Renkforce CD-1000 Mode D'emploi

9. Operation

Only take the device into operation after familiarising yourself with its functions and these
operating instructions.
Check all the connections again.
1
PO W ER
(1) POWER button
This button switches the CD player on and off.
Position ON > Device is on or in standby mode (if it is switched off via the system remote control of the
amplifier A-1000)
Position OFF > device is switched off.
(2) CD tray
Always insert the CD with the printed side up.
80 mm and 120 mm CDs can be played back.
(3) Button OPEN/CLOSE
Push this button to move the CD tray (2) in or out.
(4) Display
(5) Button PLAY/PAUSE 6/3
This button starts playback.
When pushing again, playback is interrupted (PAUSE).
Repeated activation starts playback in the location where playback was interrupted.
(6) Button STOP 5
This button stops playback.
The pick-up returns to the start of the CD.
2
6
4
O PEN /CLO S E
3 5 8
9 11
ME M OR Y ME M C LEAR
RE PEAT IN TR O
7 10 12
25