Setting The Date/Time - Parker Hiross ATT140 Manuel D'utilisation

1.10 Setting the LAST MAINTENANCE DATE
The last maintenance date is an essential piece of information to enable the system to activate the
'change fi lters' alarm at the right time.
To access this information and set a new date, follow the procedure described below:

1.11 Setting the DATE/TIME

Use the Modifying a Parameter procedure to set the correct values in the various fi elds: Year-Month-Day,
Hour-Minute
English
To update the date, set
Update Maint.Date = 1.
ATT140-340
EN
61