Parker Hiross ATT140 Manuel D'utilisation page 60

1.6 SOFTWARE revision information
EN
1.7 ALARM information
If an alarm is triggered, the ACTIVE ALARMS page is displayed automatically, to show which alarms
are currently active.
This page can be accessed in two ways:
1. By touching the alarm symbol
2. From the INFORMATION menu, as per the following procedure:
Note: The triggering of an alarm is also indicated in the main page by the activation of the symbol, as
shown in the example below:
English
, which appears in the main page in the event of an alarm.
ATT140-340
58