Sinmag Europe SE-921F Mode D'emploi page 7

7.3. Thermostat chamber temperature
Set temperature
Indication lamp
for chamber
temperature
UP
Chamber
temperature
DOWN
Setting of chamber temperature
Check if the display for the chamber temperature is lit. If this is not the case,
please push the on/off-button. Now you can set the temperature using the
arrow keys "temperature up" and "temperature down". The upper display
shows the current temperature in the baking chamber. By means of the arrow
keys "pulsation up" and "pulsation down", you can set the speed by which the
baking chamber will be heated. The temperature in the baking chamber will
now increase until the set temperature will light up as long as the temperature
is increasing. This lamp will blink when pulsation has been set, it will light up
continuously if normal heating is set.
7.4. Thermostat bottom temperature
Set bottom temperature
Indication lamp
for bottom
temperature
UP
Bottom
temperature
DOWN
Setting of bottom plate temperature
Check if the display for the bottom temperature is lit. If this is not the case,
please push the "on/off-button. Now you can set the temperature using the ar-
row keys "temperature up" and "temperature down". The upper display shows
the current temperature of the bottom plate. By means of the arrow keys "pul-
sation up" and "pulsation down", you can set the speed by which the bottom
plate will be heated. The temperature of the bottom plate will now increase
until the set temperature has been reached.
The indication lamp for the bottom plate temperature will light up as long as
the temperature is increasing. This lamp will blink when pulsation has been
set, it will light up continuously if normal heating is set.
SINMAG EUROPE BVBA
Current temperature
HIGHER
LOWER
Chamber temperature On/Off
Current bottom temperature
HIGHER
LOWER
Bottom temperature On/Off
ENG
Pulsation
Pulsation
7