GENDEX GXS-700 Manuel D'utilisateur page 29

The sensor may alternatively be positioned by hand and held in place by the patient
with one finger just like conventional X-ray film. If the positioning device is not used,
a wad of cotton wool may be useful for aligning the sensor parallel to the tooth. It
may be best to position the sensor by hand in the small mouths of children. Note
however, that image quality might be inferior with respect to one attained using an
aiming device.
4. Position the X-ray generator as usual for X-ray film.
Use of the parallel technique is highly recommended, with a rectangular cone if
possible.
CORRECT
Important:
5. Acquire the image by pressing the X-ray button on your radiography system.
Important:
032-0279-EN Rev 1
Verify connectivity of the GXS-700.
It is important that the X-ray beam hits the whole sensor surface.
USB PORT
INCORRECT
Use
6-3