Service - GENDEX GXS-700 Manuel D'utilisateur

Resolution:
Equalize:
Despeckle:
Mirror:

Service

This dialog allows:
Send Image Button:
Clicking the Send Image Button tells the Fusion Lib to send a simulated X-ray image from
the "sensor" to GxPicture. GxPicture then grabs the simulated image and sends it to
VixWin (or 3rd party imaging software). Clicking this button is a way for the user to
determine if the GXS-700 system is properly installed.
032-0279-EN Rev 1
Sets the amount of detail the image holds. Higher resolution means
more image detail. (Default: High - Range: Low/High)
Enhances image contrast by maximizing the use of the available
grayscale. (Default: Off)
Reduces typical grainy or speckled appearance of X-ray images
(Note: results in a small loss in resolution). (Default: Off).
Flips image across the vertical axis. (Default: Off)
•
Change location of the GXS-700 Event Log
•
Generate a test image intended to verify the logical connection
between GxPicture and the application software.
•
Allows activation of a connected sensor to generate a test image
to verify connection between the sensor USB and GxPicture and
further into the application software.
GxPicture Software
5-5