Chapter 5 - Gxpicture Software; Status Icon - GENDEX GXS-700 Manuel D'utilisateur

Chapter
5

Status Icon

In the Windows System Tray (portion of the "application bar" next to the "system clock",
available in all releases of Microsoft
representing the status of the sensor. Each icon identifies a different status, as listed below.
• SENSOR WITH GREEN BACKGROUND icon indicates correct functioning of all
connected sensors. GXS-700 is ready to capture images.
• SENSOR CROSSED OUT IN RED icon indicates there is no connection to the
computer and/or is unavailable for image acquisition. No GXS-700 is detected.
• SENSOR WITH BLUE BACKGROUND icon indicates the sensor is transferring
the image to the PC.
Important:
If no status icon appears, CHECK THAT YOU HAVE INSTALLED THE SOFTWARE
DRIVER CORRECTLY. GXS-700 cannot operate without the driver.
Right Click the status icon to access the configuration panel containing information about the
sensor, software release and image settings of the sensor in use, which may be useful when
requesting technical support.
NOTE:
Detailed instructions for verification or installation of software drivers are
supplied in the Microsoft® Windows® manual. Inexperienced users should
ask specialized personnel to install software drivers.
CAUTION
Always check that the green icon is displayed before making exposures to
ensure correct operation.
032-0279-EN Rev 1
GxPicture Software
® ®
Windows operating systems) an icon appears
5-1