in-lite FLUX 60 Manuel D'utilisation page 6

EN
Contents
1x FLUX 60 12 V / 2 W
Dimensions Ø 60 mm / 2.4 inches, ring Ø 68 mm / 2.7 inches
Recess depth 55 mm / 2.2 inches
1x Easy-Lock
1x protective plate
Material
Impact-resistant polycarbonate
Stainless steel ring
Please read the following instructions before installing. You are
advised to keep these installation instructions in a safe place.
Use
Integrated accent lighting for special features in the yard such as
trees, shrubs, statues and exterior walls.
Lamp
The fixture is equipped with a high-quality LED lamp. These lamps
have a long life and a high light output and their power consumption
and the heat produced are extremely low.
General Installation Guideline
During installation, make sure that all components are easily
accessible for replacement.
Important!
Never connect the low-voltage cable directly to a 100-240 V power
source. It is only suitable for use in combination with a 12 V low-voltage
system. This product should only be used within the in-lite system. Use
of products other than those made by in-lite will invalidate the warranty.
Enjoy the lighting in your yard.