Lucci fini 210012 Guide D'installation page 6

Installation Instructions
Operating the remote
Before you start using the remote, take the time to read through this section and get familiar with the function of each
button.
Fig. 5
LED Indicator: The red LED indicator on the top of transmitter will flash when the buttons are active.
HI: Press the button to set fan running speed to high.
MED: Press the button to set fan running speed to medium.
LOW: Press the button to set fan running speed to low.
OFF: Press the button to turn OFF the fan.
: Press the button to turn ON/ OFF the light.
The remote has memory function. If the fan or light is turned off by the wall switch, it will memorise and recover the
last status when turned on next.
6 | P a g e