Technical Data; English; Ec Declaration Of Conformity - Milwaukee M18-28 CPDEX Notice Originale

TECHNICAL DATA

Dust extractor
Production code
Stroke max.
Drilling capacity max.
Drill bit length max.
Drilling depth max.
Weight
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury. Save all warnings and
instructions for future reference.
It is also essential that you read and follow the user manual
for the hammer drill you use.
GB
HAMMER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
Additional Safety and Working Instructions
Do not use the dust extractor for drilling work in wood, steel or
plastic.
Do not use machines on any material containing asbestos.
The following materials should not be picked up by the
vacuum cleaner
• hazardous dust
• ammable, explosive dust (e.g. magnesium or aluminium dust,
etc.)
Despite using the dust extractor, a small amount of dust may still
escape.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Only use the appliance if it is in perfect condition. Never use the
dust extractor without a lter, or if the lter is damaged.
SPECIFIED CONDITIONS OF USE
The dust extractor is designed for the extraction of dust in drilling
applications with hammer drills in stone and concrete.
The dust extractor may only be used as an accessory for the following
machines: Milwaukee M18 CHPX, M28 CHPX
MAINTENANCE
The ventilation slots of the machine must be kept clear at all times.
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,

English

8
please contact one of our Milwaukee service agents (see our list of
M18-28 CPDEX
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
4468 11 03...
state the Article No. as well as the machine type printed on the
4524 67 03...
label and order the drawing at your local service agents or directly
... 000001-999999
at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Win-
nenden, Germany.
105 mm
16 mm

EC DECLARATION OF CONFORMITY

160 mm
We declare under our sole responsibility that the product described
under "Technical Data" ful lls all the relevant provisions of the
90 mm
directives
1,6 kg
2011/65/EU (RoHS)
2006/42/EC
2000/14/EC
2014/30/EU
and the following harmonized standards have been used.
EN 60745-1:2009 + A11:2010
EN 60745-2-6:2010
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:2015
EN 50581:2012
Alexander Krug / Managing Director
Authorized to compile the technical le
Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
SYMBOLS
Winnenden, 2017-11-30
Please read the instructions carefully before starting the
machine.
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on the
appliance.
Always wear goggles when using the machine.
Wear a suitable dust protection mask.
Do not dispose electric tools, batteries/rechargeable
batteries together with household waste material. Electric
tools and batteries that have reached the end of their
life must be collected separately and returned to an
environmentally compatible recycling facility. Check with
your local authority or retailer for recycling advice and
collection point.
European Conformity Mark
UkrSEPRO Conformity Mark
EurAsian Conformity Mark