Thank you for buying this Pioneer product.
Please read through these operating
instructions so you will know how to
operate your model properly.
The DVD-D302 is an optional add-on drive
designed for use with the "DRM-1004" 100
disc changer, and as such it cannot be
used as a standalone product.
Warning: Installation
Installing add-on drives is a task which
requires advanced technical skills and
knowledge, and to ensure safety always
be sure to request that installation be
performed by trained Pioneer service
personnel. (For further information on how
to request such service, please contact a
retail dealer which handles the DVD-D302
drive.)
IMPORTANT
CAUTION
This product contains a laser diode of higher
class than 1. To ensure continued safety, do not
remove any covers or attempt to gain access to
the inside of the product.
Refer all servicing to qualified personnel.
WARNING:
TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE:
RECORD THE MODEL NUMBER AND
S E R I A L N U M B E R O F T H I S
EQUIPMENT BELOW. THE SERIAL
NUMBER IS ON THE TOP.
MODEL NO.
SERIAL NO.
K E E P T H E S E N U M B E R S F O R
FUTURE USE.
IMPORTANT
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The following caution label appears on
your unit.
Location: on top of the cover
CLASS 1 LASER PRODUCT
LASER KLASSE 1
DVD-D302
3
<DRC1135>
En