Test Light Instructions - Radio Systems PetSafe Guardian Underground Fence Guide D'emploi

Test Light Instructions

1. Set the Correction Level to 2 or above.
2. Hold the Test Light Contacts to the Contact
Points (K).
3. Walk toward the Boundary Wire holding the
Receiver collar at your pet's neck level (L)
until the Test Light fl ashes (M).
Save the Test Light for future testing.
If the Test Light does not fl ash, refer to
the Troubleshooting section, or call the
Customer Care Center.
L
12 1-866-381-2785 (US) / 1-800-457-3911 (Canada)
K
M
Boundary
Wire