Hook-Up - Blomberg MIN 5400 Guide D'installation Et D'utilisation

99635771.qxd 18/02/05
1 1 / INSTALLING YOUR APPLIANCE
• •

HOOK-UP

• 220-240 V monophase hook-up
3 3 2 2 -amp fuse.
Blue
Brown
L L
N N
• 400 V 2N triphase hook-up
1 1 6 6 -amp fuse.
Separate the two phase wires (L1 and L2)
before hooking up.
Black
Brown
Blue
N N L L 1 1
For a 400 V 2N triphase hook-up, if your hob
malfunctions, check
conductor is properly connected.
14:44 Page 31
These hobs must be connected to the power
grid via an electrical outlet that complies with
EIC publication 60083 or an all-pole cut-off
device that complies with installation
regulations in effect.
When power is first supplied to your hob, or
after an extended power outage, an indicator
Black
light will appear on the control panel. It
Green/yellow
automatically disappears after approximately
30 seconds, or as soon as any touch control
on the control panel is pressed. This display is
normal and, if needed, serves as an indication
to the after-sales service staff. In all cases, the
user of the hob should disregard it.
should be replaced by the manufacturer, its
after-sales service department or by a
person with similar qualifications to avoid
danger.
Green/yellow
L L 2 2
that the neutral
31
Warning
If the power cable is damaged, it