Connections - Sharp PN-L851H Manuel D'installation

Caution
• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting
cables. Also, read the manual of the equipment to be connected.
• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables
connected to the input and output terminals may cause malfunctions and the other problems.
Power cord
(Supplied)
For power outlet
TIPS
• Set the audio input terminal used for each input mode in AUDIO SELECT on the SETUP menu. The factory settings are
shown below.
Input mode
DisplayPort
HDMI1
HDMI2
D-SUB
• To use a touch panel with a computer connected to the video input terminal on this monitor, TOUCH PANEL1 terminal on the
side and computer must be connected using the supplied USB cable, and Touch pen Management Tool must be installed on
the computer from the supplied CD-ROM. (Factory setting)
• To use the TOUCH PANEL2 terminal on the bottom, change the setting for the terminal used in TOUCH INPUT SELECT in
the SETUP menu to TOUCH PANEL2.
• Install Pen Software from the supplied CD-ROM.
When the Information Display Downloader is installed, you can check and download the most recent versions of the software
programs.
To install the software, see the manual for each.
Touch Viewer setup program and SHARP Display Connect setup program can be downloaded using Information Display
Downloader.
• The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc.
• DisplayPort is a registered trademark of Video Electronics Standards Association.
• Adobe, Acrobat, and Acrobat Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
• Google and Android are trademarks or registered trademarks of Google LLC.
• VESA is either registered trademark or trademark of Video Electronics Standards Association in the United States and/or
other countries.
• All other brand and product names are trademarks or registered trademarks of their respective holders.
6
E

Connections

1
13
14 15 16 17 18
Audio input terminal (Factory setting)
DisplayPort input terminal
HDMI1 input terminal
HDMI2 input terminal
Audio input terminal
1. AC input terminal
2
2. Wireless LAN antenna terminal
3
3. LAN terminal
4. USB port (USB 3.0 compliant)
4
5. USB port (USB 2.0 compliant)
6. microSD card slot
5
7. Expansion slot
7
6
8. TOUCH PANEL1 terminal
(for touch panel)
2
8
9. D-sub input terminal
10. DisplayPort input terminal
9
11. HDMI1 input terminal
12. HDMI2 input terminal
10
13. External speaker terminals
11
14. USB hub (for computer) (USB
2.0 compliant)
12
15. TOUCH PANEL2 terminal
(for touch panel)
16. Audio output terminal
17. DisplayPort output terminal
18. RS-232C input terminal
19
19. Audio input terminal