Instruction manual
Deep cleaning
• The Cleaner will cover your room twice to ensure that it reached every corner.
• Note: You can start the "Deep cleaning" program from the App.
Random cleaning
• The Cleaner will clean in a random pattern, instead of a smart
combination of zig-zag and edges.
• Note: You can start the "Random" program from the App.
MAP NAVIGATION FUNCTION
• Before use, place the Cleaner flat on the floor.
• Turn on power switch, next, tap
shows a rotating loading animation and a "startup" sound is played.
• After turning on, the display is off (depending on the connection status, it
may show the "Cloud connection" icon). Then tap
one more time to start cleaning.
• The Cleaner will return to docking station automatically after cleaning if
the docking station is powered on. If no docking station detected, the
Cleaner will return near its starting point after cleaning.
8
button on the top. The display panel
button on the top
SUCTION KIT AND ROLLER BRUSH KIT
• Suction kit and roller brush kit can be switched out at the bottom of your
Cleaner (as shown in below figure).
CLEANING AND MAINTENANCE
Cleaning Side Brushes
• Check the side brush when it gets dirty and replace it if it's damaged.
The maximum lifespan for the side brushes is 12 months.
• Note: Before replacing side brushes, please pay attention to the "left"
and "right" mark ("L"/ "R") on the side brushes, which match with the
"L"/ "R" mark on the bottom of the Cleaner.