Princess Deluxe Mode D'emploi page 9

Cleaning Dust Bin and Filters
• Empty and clean dust bin after each use following the steps as shown in
the below figures:
Note:
• Wash primary filter after 15-30 days of use. Maximum life span for filters
is 24 months.
• Re-install the HEPA and primary filter after they're fully dry.
• HEPA and primary filter could be replaced if needed.
• Do not expose the filters to intense sunlight directly.
Cleaning Sensors and Wheels
• Slightly wipe all the sensors and wheels, as marked in below figure, with
soft cleaning cloth or tool.
Cleaning Charging Poles
• Clean the charging poles, as marked in below figure, with soft cleaning
cloth or tool.
Cleaning Suction Passage and Dust Sensor
• Take out the suction kit from Cleaner, then clean the suction passage and
dust sensor, as marked in below figure, with soft cleaning cloth or tool.
• Note: Keep the Cleaner and sensors dry and avoid contact with liquids.
Cleaning Roller Brush Kit
• Take out the roller brush kit from Cleaner, remove the roller brush, then
clean it and its cover-plate & holder, as shown in the below figure, with
soft cleaning cloth or tool. (the roller brush can be washed by water).
EN
9