LENCO Xemio-560 Mode D'emploi page 13

1. LCD set
2. Language
3. Power off
4. Memory info
5. Firmware version
6. Factory setting
7. Exit
LCD set:
Here you can set the time before the LCD switches off
Language:
To set the preferred OSD language. Scroll with the - or + button and select with the
Power off:
Here you can select the off time and sleep time. Select off time to choose after how many seconds
without action the device will turn off. Sleep time is to select after how many seconds the device turns
off even when performing actions.
Memory info:
Here you can see how much free memory is left.
Note: You can't see the memory info of your Micro SD card.
Firmware version:
Display the current firmware version.
Factory setting:
Restore the device back to the factory settings.
Exit:
Go back to the main menu.
Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of repairs
(both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the
warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of
the manufacturer will be voided.
13
button