Bycool FLAT 12/24V. Instructions De Montage page 30

FLAT
ES
EN
Assemble the filter in the pipe with a bolt,
21
insert into the filler plug and connect to
the return pipe Ø18 x Ø12 (A).
Place the filler plug in the tank, cut to
22
100mm; insert "T" and connect the pipe
with the smaller diameter to this, mark
with white tape and check that the
curve radius is big enough to avoid
constriction.
Connect sheathed wiring to the
23
evaporative boxes and water inlet pipe.
A. Connect the impulsion pipe to the
pump which comes from the evaporative
unit.
B. Connect pump wiring and level.
A
A
30
Air conditioning for vehicles
A
22
23
B