Maintenance And Care; Replacing The Grinding Wheel - Toolland VL6000 Mode D'emploi

A depth limit distance that is too great represents a risk of kickback. For this purpose you must
check the distance according to the specifications of your chain and file it off with a file if
necessary.
Be sure to chamfer the leading edge of your depth limiter. The original shape of the cutting link
must be preserved.
10. Overview
Refer to illustrations
1 Rotary table, complete
2 Supporting table
3 Mounting screw (with spring)
4 Chain stop
5 Guide plate
6 Guide rail
7 Locking nut
8 Setting screw (for grinding depth)
9 Grinding wheel (100 x 3.2 x 10 mm)
10 cover
11.

Maintenance and Care

Before each maintenance and cleaning work:
 Switch off the device
 Wait for the shutdown of the grinding wheel
 Pull out the main plug

11.1 Replacing the Grinding Wheel

 Do not use any damaged grinding wheels or such that have changed their shape.
 Do not use any grinding wheels which do not comply with the indicated characteristics of this
instruction manual.
1. Loosen the screw caps (14) and remove the protective cover (20).
2. , Loosen the nut (21) on both sides of the cover (10). Remove the cover.
3. To lock the grinding wheel, insert a screw driver or mandrel (Ø 4 mm) in the hole provided.
4. Loosen the nut (15).
Right-handed thread.
5. , Remove the nut, the front flange (16), the grinding wheel (9) and the rear flange (16).
6. Clean the flanges.
7. Reassembly is done in the opposite sequence.
For maintaining and cleaning, removed security devices must unconditionally be mounted properly
and proved again. Use only original parts. Other parts can result in unexpected damages and
injuries.
V. 01 – 05/06/2015
and on pages 2 and 3 of this manual.
VL6000
a. Cutting edge
b. Depth limit
c. Cutting edge
d. File
e. Depth limit
11 Handle
12 On-off switch
13 Grinding head
14 Screw cap
15 Nut M8, self-locking
16 Flange
17 Safety label
18 1 pair of carbon brushes
19 Protective cover
20 nut
9 ©Velleman nv