Proper Use; Residual Risks; Safety Instructions; User Manual - Toolland VL6000 Mode D'emploi

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling. This device should be returned to your distributor or
to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Toolland. Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2.

Proper Use

 The chain sharpener is only intended to be used in the DIY and craft area. In the standard version with
mounted wheel (100 x 3.2 x 10 mm, 63 m/s), the chain sharpener is only intended to sharpen chains used
in hobby applications (6.35 mm (1/4"), 9.52 mm (3/8") hobby and 8.255 (0.325") chains). An optional
grinding wheel (100 x 4.5 x 10 mm) is available for professional cutting chains.
 The device may not be used to sharpen other objects. Otherwise, there is a risk of injury.
 Only use grinding wheels suitable for the machine.
 Only chains may be worked that can be put down and guided securely.
 The intended usage also includes compliance with the operating, servicing and repair conditions prescribed
by the manufacturer and following the safety instructions.
 The relevant accident prevention regulations for the operation as well as the other generally acknowledged
occupational medicine and safety rules must be complied with.
 Any other use other as described in this manual is deemed inappropriate. The manufacturer is not liable for
any type of damage resulting from this: the user bears the sole risk.
 Arbitrary modifications of the chain sharpener void the liability of the manufacturer for damages of all kinds
resulting from them.
 Only persons familiar with the chain sharpener and instructed about possible risks are allowed to prepare,
operate and service this device. Repair work may only be performed by an authorized service agency.
 The machine may not be used in a potentially explosive environment or be exposed to rain.
3.

Residual Risks

Residual risks can exist even if the relevant safety regulations are complied with due to the design determined
by the intended purpose.
Residual risks can be minimised if the safety information and the intended usage, as well as the whole of the
operating instructions are observed.
Observing these instructions and taking proper care will reduce the risk of personal injury or damage of the
equipment.
 Risk of injury to fingers and hands by touching the running grinding wheel.
 Risk of injury to fingers and hands by touching the grinding wheel in areas not covered.
 Risk of injury by flying sparks.
 Inhalation of grinding dust.
 Danger resulting from electric current if improper connecting wires are used.
 Touching live parts of opened electrical components.
 Impairment of hearing when working on the machine for longer periods of time without ear protection.
In addition, in spite of all the precautionary measures taken, non-obvious residual risks can still exist.
4.

Safety Instructions

Chain sharpeners can be dangerous when used improperly. The use of electrical tools requires the
observation of basic safety precautions to eliminate risk of fire, electrical shock and personal
injuries.
Before commissioning this product, read and keep to the following advice. Also, observe the
preventive regulations of your professional association and the safety provisions applicable in the
respective country in order to protect yourself and others from possible injury.
V. 01 – 05/06/2015
VL6000

USER MANUAL

4 ©Velleman nv