• When you turn on the device, it tries to connect to the last phone to which it
was connected.
• You might need to set your phone to connect to the device automatically
when the device is turned on.
• You should verify the Bluetooth
Pairing Additional Bluetooth Devices
1
Place your headset or phone and your Bluetooth device within 33 ft. (10 m) of
each other.
2
On your device, enable Bluetooth wireless technology.
3
On your headset or phone, enable Bluetooth wireless technology and ensure
it is visible to other Bluetooth devices.
4
>
On your device, select
A list of nearby Bluetooth devices appears.
5
Select your headset or phone from the list.
6
If necessary, select Pair.
Connecting a Compatible Bluetooth Device
You can play media from a compatible Bluetooth device using the Bluetooth
wireless connection.
1
From the music app, select the BT source.
2
Select
> DISCOVERABLE to make the stereo visible to your compatible
Bluetooth device.
NOTE: The stereo is discoverable for only two minutes to prevent interruption
to audio streaming over Bluetooth wireless. If more than two minutes pass
before you connect a compatible device, you must repeat this step.
3
Enable Bluetooth on your compatible Bluetooth device.
4
Bring the compatible Bluetooth device within 10 m (33 ft.) of the stereo.
5
On your compatible Bluetooth device, search for Bluetooth devices.
6
Select the stereo from the list of detected devices.
Quick Start Manual
features you want to use are enabled.
®
>
> Bluetooth.
7
Follow the on-screen instructions to pair and connect to the discovered
stereo.
When pairing, your compatible Bluetooth device may ask you to confirm a
code on the stereo. The stereo does not display a code, but it does connect
correctly when you confirm the message on the Bluetooth device.
8
If your compatible Bluetooth device does not immediately connect to the
stereo, repeat steps 1 through 7.
Hands-Free Calling
NOTE: While most phones and headsets are supported and can be used, a
particular phone or headset cannot be guaranteed to be compatible. All features
may not be available for your phone.
Using Bluetooth wireless technology, your device can connect to your compatible
mobile phone and wireless headset or helmet to become a hands-free device. To
check compatibility, go to www.garmin.com/bluetooth.
Placing a Call
1
Select
.
2
Select an option:
• To dial a number, select , enter the phone number, and select
• To view numbers of recent, missed, or recently dialed or received calls,
select
, select a log, and select a number to dial it.
• To call a contact from your phone book, select
Receiving a Call
When you receive a call, select Answer or Decline.
Playing Media
When you play media, the dock operates as the stereo. The display operates as
the stereo remote control.
1
From the media controls on the home screen, select a source
.
, and select a contact.
.
5