Technical Information; General Description; Intended Uses; Main Components - Annovi Reverberi XWF 26.06 N Notice D'utilisation Et Installation

Masquer les pouces

100

Table des Matières

Les langues disponibles

General description

The pump is designed and constructed to pump and compress liquids at high pressure in industrial applications.

The pumping action is provided by a series of pistons connected to the drive shaft by connecting-rods.

When in operation, the pistons perform an axial stroke inside the head, where the intake and delivery ducts are

fitted with valves which allow the liquid to pass in one direction only.

Main components

UN003404-CV

Intended uses

The pump is designed and built for incorporation in machinery and plants (machinery for washing raw

materials, finished products, etc.).

The pump must be used in a manner appropriate to its technical data (see "Technical Data"), and must not be

modified or improperly used.

Misuses

Do not put the pump into service until the plant or machinery in which it is incorporated has been declared

compliant with the relevant national and local legal requirements.

Do not use the pump in a potentially explosive atmosphere.

Do not use the pump for flammable, toxic or corrosive liquids, or those with unsuitable density. Do not take in

liquids at temperatures higher than those specified in the technical data.

Do not use the pump for the supply of drinking water.

Do not use the pump on products for human consumption.

Do not use the pump on pharmaceutical products.

Residual risks

Even if the safety regulations and information provided in the manual is complied with, the residual risk

described below is still present during use of the pump.

- Thermal hazard: depending on the temperature of the liquid pumped, the pump may reach high

temperatures when in operation. The designer of the installation must therefore bear this in mind and

provide the appropriate measures and warning signs for staff.

English