Setting Up Anynet - Samsung 6 Série Mode D'emploi

Setting Up Anynet+

the following settings are to use Anynet+ functions.
Using the Anynet+ Function
1. Press The tOOLS button. Then Press the ENtER
select "Anynet+(HDMI-CEC)".
Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
2. Press the ENtER
then press the ENtER
. Press the ▲ or ▼ button to select "On", then press the
ENtER button.
➣
The "Anynet+ (HDMI-CEC)" function is enabled.
➣
If you select "Off", "Anynet+ (HDMI-CEC)" is disabled.
➣
When the "Anynet+ (HDMI-CEC)" function is disabled, all the
Anynet+ related operations are deactivated.
turning an Anynet+ Device Off Automatically when the tV is turned Off
1. Press the ▲ or ▼ button to select "Auto Turn Off", then press
the ENtER button.
2. Press the ▲ or ▼ button to select "Yes", then press the
ENtER button.
➣
The Auto turn off function is enabled.
➣
If you select "No", the Auto turn off function is cancelled.
Press the EXIt button to exit.
➣
The Select Device setting of the TV remote control is to be set
to TV to use the Anynet+ function.
➣
If you set "Auto Turn Off" to "No", connected external devices are also turned off when the TV is
turned off. However, if the device is recording, it may not be turned off.
button to select "Anynet+ (HDMI-CEC)",
button.
English - 
button to
Anynet+ (hDMI-CEC)
Picture Mode
Sound Mode
Sleep timer
SRS tS Xt
Energy Saving
Dual l-ll
Move
tV P
View tV
Select Device
Record
Menu on Device
Device Operation
Receiver
Setup
Move
Return
Anynet+ (hDMI-CEC)
Auto turn Off
Searching Connections
Move
Anynet+ (hDMI-CEC)
Auto turn Off
Searching Connections
Move
tools
: Standard
: Custom
: Off
: Off
: Off
: Mono
e Exit
Enter





:Off

Enter
Setup
: Off
Off
: Off On
Enter Return
Setup
: On
: Off
No
Yes
Enter Return