Setting Up Anynet; Switching Between Anynet + Devices; Recording - Samsung 5 Serie Guide De L'utilisateur

Advanced Features
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device list
(device_name) MEnU
(device_name) InFO
Recording: (*recorder)
stop Recording: (*recorder)
Receiver
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).

setting Up Anynet+

¦
O
m → Application → Anynet + (hDMI-CEC) → EnTERE
MEnU
setup
■
Anynet+ (hDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (hDMI-CEC) must be set to On.
✎
When the Anynet+ (hDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (no / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
✎
The active source on the TV must be set to TV to use the Anynet+ function.
✎
Even if an external device is still recording, it may turn off.
switching between Anynet
¦
1. Anynet+ devices connected to the TV are listed.
✎
If you cannot find a device you want, press the red button to refresh the list.
2. Select a device and press the EnTERE button. You can switch to the selected device.
✎
Only when you set
x
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
x
If you have selected external input mode by pressing the
Make sure to switch to an Anynet+ device by using the Device list.

Recording

¦
You can make a recording of a TV Program using a Samsung recorder.
1. Select Recording.
✎
When there are more than two recording devices
x
When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device list.
✎
When the recording device is not displayed, select
2. Press the EXIT button to exit.
✎
You can record the source streams by selecting
✎
Pressing the � (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
✎
Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device's users manual.
30
English
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stops recording.
Sound is played through the receiver.
+ Devices
Anynet+ (hDMI-CEC) to On in the Application menu, the Device list menu appears.
sOURCE button, you cannot use the Anynet+ function.
Device list and press the Red button to search devices.
Recording: (device_name).