Samsung 6 Série Mode D'emploi page 23

♦
Screen Mode: 1:/Wide Zoom/Zoom/:
When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size you
want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country
requires different picture size so this function is intended for users to select it.
♦
1:: Sets the picture to 16:9 wide mode.
♦
Wide Zoom: Magnify the size of the picture more than 4:3.
♦
Zoom: Magnify the size of the picture vertically on screen.
♦
:: Sets the picture to 4:3 normal mode.
➣
This function is available in "Auto Wide" mode.
➣
This function is not available in "PC", "Component" or "HDMI" mode.
♦
Digital NR: Off/Low/Medium/high/Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
➣
When the signal is weak, select one of the other options until the best picture is displayed.
♦
DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can
view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied
DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view
the difference in the visual quality.
➣
DNIe ™ (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
brighter, clearer, more detailed image to you. DNIe ™ technology will it every signal into your
eyes.
➣
This function is not available in "Movie" and "Standard" mode.
♦
hDMI black Level: Normal/Low
You can directly select the black level on the screen to adjust the screen depth.
➣
This function is active only when the external input connects to HDMI(RGB signals).
♦
Movie Plus: Off/Low/Medium/high/Demo (LE2A)
You can view more natural skin and clear text even in fast moving scenes.
➣
Use this function when watching movies.
➣
This function is not available in "Wide Zoom" and "Zoom" modes.
➣
This function is not available when "PIP" is set to "On".
➣
It is not supported in HDMI 1080p/24Hz mode.
♦
100hz Motion Plus: Off/Low/Medium/high/Demo (LEA, LE0A, LEA, LE2A)
Removes drag from fast scenes with a lot of movement to provide a clearer picture.
➣
This function is not available in PC mode.
➣
If you enable "100 Hz Motion Plus", noise may appear on the screen. If this occurs, set "100Hz
Motion Plus" to "off" or select one of the other options.
♦
blue Only Mode: Off/On
This function is for AV device measurement experts. This function displays the blue signal only by
removing the red and green signals from the video signal so as to provide a Blue Filter effect that is
used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal
level of each video device using the Red/Green/Blue/ Cyan/Magenta/Yellow Colour Bar Patterns,
without using an additional Blue Filter.
➣
"Blue Only Mode" is available when the picture mode is set to "Movie" or "Standard".
English - 21