Bergen 2
English
17.2 Install a floor drain optional)
Install a floor drain with a slight slope to avoid:
• unpleasant odours inside the cabinet
• dispersion of cooled air
• malfunction of the cabinet due to moisture
Procedure
• install a suitable siphon between the drain and the connection to ground
• hermetically seal the area of drainage to ground.
i
periodically check that hydraulic connections are perfectly efficient, contacting a qualified
installer.
18. Demisting and anti-condensation
Fogging and condensation are eliminated by the heaters fitted in the cabinet.
19. Lighting
The cabinets are supplied with LED lights (Fig.14).
The lights switch is near the electronic controller (Fig.10)
CAUTION! Accidental breakage of bulbs. Injury. Contamination of the goods.
- wear the envisioned PPE
- cut off power supply to the cabinet
- remove all goods
- clean as indicated in section 22.4
- remove any trace of glass from the goods
- reload the cabinet with goods cleaned thoroughly
- restore electrical power supply
20. Close the sliding windows
Bergen 2 is equipped with low emissivity sliding windows.
Benefits
• significant reduction in energy used for refrigeration
• improved temperature of food
• increased quality of preservation
If closing and
Remedy
opening are
difficult
What to avoid
Check frequently that the sliding windows are completely closed.
21. Replace the lights
DANGER! Live parts. Electrocution.
REMOVE THE ELECTRIC POWER SUPPLY BEFORE ANY OPERATION!
38
• check the causes of the malfunction
• use the handle to slide the glass on PVC tracks
• DO NOT use excessive force
• DO NOT carry out different manoeuvres with
the closure and movement system
• DO NOT drag or slide the locks in other ways;
risk of damaging the locks and injury
• NEVER use the sliding locks to support the prod-
ucts during loading; the closures have not been
designed to sustain loads .(Fig.13)
• DO NOT leave the sliding windows open or ajar.
05060176 00 11-09-2018