Changing The Batteries - Beurer medical FT 70 Mode D'emploi

Mode
Voice output
Display
The temperature last measured, i.e. only the last value of a series of measurements, is automatically stored as soon as the
thermometer switches itself off or is switched off . There are 10 storage spaces available for this.
To switch the thermometer off , press the
If you do not take any further measurements, the thermometer switches itself off automatically after approx. one minute
after the measured values have been displayed.
To call up the saved values, switch the thermometer on and press the
The date, time, storage space number, the measurement mode symbol and the temperature are displayed in turn. Storage
space number and measurement are announced. Browse through the stored measurements by pressing the
repeatedly.
Mode
Voice output
Display

8. Changing the batteries

When the batteries get weak, the battery warning symbol appears
batteries must be replaced. When the battery symbol fl ashes
replaced. If the batteries are too fl at, then the thermometer will switch off automatically.
26
Ear
Your body temperature is ...
and Forehead buttons simultaneously for approx. three seconds.
Ear
Memory ..., your body tem-
perature was ...
Forehead
Your body temperature is ...
button.
Forehead
Memory ..., your body tem-
perature was ...
. It is still possible to measure temperature. The
and appears in the display, the batteries must be
Object
The object temperature is ...
button
Object
Memory ..., the object tem-
perature was ...