Selve i-Control Notice D'utilisation page 37

Troubleshooting
Problem
Motor is not functioning
Motor moves in the wrong
direction
The i-Control does not
execute external commands
The i-R Control does not
execute external wired com-
mands.
The i-R Control does not
execute manual control
commands
The i-R Control does not
execute automatic control
commands
Cause
Faulty connection
Faulty connection
The i-Control is set to
manual mode
Alarm signal is active
The i-R Control is set to
manual mode
Alarm signal is active
Transmitter is not
programmed
Alarm signal is active
Transmitter is not program-
med
Alarm signal is active
The i-R Control is set to
manual mode
Solution
Check the connection
Exchange and
in the power supply unit
Set the i-Control to auto-
matic mode
Await alarm signal or
eliminate
Set the i-R Control to auto-
matic mode
Await alarm signal or
eliminate
Programme transmitter
Await alarm signal or
eliminate
Programme transmitter
Await alarm signal or
eliminate
Set the i-R Control to auto-
matic mode
wires