Publicité
Les langues disponibles
Les langues disponibles
5. Mount the small table top with the remaining
handwheel to the frame.
Height adjustment
The height of the table top con be adjusted with the
help of the hand wheel and the locking pin.
GB
Loosen the hand wheel of the frame and hold the
crossbar with your hand while you pull the locking
pin outwards. After you loosened the locking pin
you can move the crossbar up or down.
lmportant: Make sure that the locking pin snaps in
before you tighten the hand wheel again.
Crossbar with hand wheel and locking pin.
6
at
Handbrake
The „REHASHOP bed table Robeti" is equipped
with two handbrakes on two of the wheels. To
activate and to lock the brakes use your foot to push
down both plastic levers. To unlock the handbrake
pull up both locking levers.
lmportant: Secure the „REHASHOP bed table Ro-
beti" with the handbrakes against accidental rolling
away. Especially on slippery and uneven grounds the
danger of rolling away is present.
Handbrake
The rack
The rack in beech tree design is meant for the sto-
ring of little things. It is not allowed to use the rack
as seat. lmportant: To avoid damages do not put hot,
heavy or sharp things on the rack.
Cleaning and maintenance
To clean the bed table simply use water and if you
wish a mild cleanser. You can remove tough dirt
by using a car cleanser. No water should enter the
bed table tubes during the cleaning process which
is why it should only be cleaned in a fully mounted
position. lf needed, have your bed table checked
and maintained by a professional or replace a worn
out one with a new one. Make sure to contact your
specialist dealer when you find any defects while
checking the broking force on a regular basis. lt is
not allowed to operate the bed table without profes-
sional maintenance.
ch
verpleeg-
A L L E S W E E R Z O G O E D A L S V R O E G E R
nl
Publicité
