Instruction manual REHASHOP bed table Robeti
Articelno. KREHA-1006
The product
The „REHASHOP bed table Robeti" serves as a tray
or rack in combination with a bed for elderly people
or a hospital bed.
lt is the perfect support to eat meals in bed or to use
it as book support. The bed table is height adjustable
and the table top can be easily tilted to individual
needs. The table is equipped with rollers and can be
easily moved around. Due to its special solid const-
ruction it can be placed with its base part under the
hospital bed.
The table top of the „REHASHOP bed table Robeti"
has a nice beech tree design with a synthetic coating.
The surrounding edges are bordered with a solid
beech tree wood frame.
The mounting of the bed table
The REHASHOP bedtable Robeti consists of three
parts which have to be assembled. Please check if all
at
1. Rack
2. Table top
3. Hand wheel (tiltable)
4. Locking pin (height adjustment)
5. Hand wheel (height adjustment)
6. Crossbar
7. Handbrake
8. Running gear
9. Hand wheels fastening
10. Rollers
parts shown on the picture have been delivered and
mount the bedtable in the following sequence:
1. Remove all the packing material
2. Start to mount the bedtable with lower part of the
frame. Mount the 4 wheels by putting them into the
frame. Mount the lower part with two handwheels
on the bottom of the frame (No. 9). Check if the
safety pin (No. 4) is mounted in the correct position
(See picture)
3. Assemble the tabletop and put the upper part of
the frame into the tube of the lower part of the fra-
me. Check if the safety pin fits into one of the holes.
The shorter screw will be needed to lock the height
adjustment (No. 5). The larger screw is needed for
the adjustment of the angle of the table top (No. 3).
4. Loosen the larger screw and flip the table top in a
horizontal position. Lock the table top by fastening
this screw. Make sure that the screw fits into one of
the deepenings.
ch
verpleeg-
A L L E S W E E R Z O G O E D A L S V R O E G E R
nl
GB
5