Safety Instructions - Steba E 150 Mode D'emploi

Premium Juicer

Safety instructions:

∙ Only use the appliance according the instructions on the rating label
∙ Assamble the juicer correctly, else the appliance cannot be switched on
∙ Place the appliance in a even, dry and stable working surface
∙ To avoid any electrical shock, never immerse the appliance or the power cord into
water Never use the appliance when the power cord is damaged or the appliance
has fallen down
∙ The power cord shall not hang over sharp edges or touch hot surfaces.
∙ Pull the plug out of the socket after each usage and during any cleaning
∙ Before each usage it must be checked carefully that the appliance is assambled
correctly
∙ To avoid any dangers any damaged power cord, plug, or after a malfunction the
appliance must be exchanged by an authorized servicemen.
∙ Never let children work with the appliance unattended.
∙ Never push food with the fingers or any other non suitable item into the feeding
opening, only use the delivered pusher.
∙ Never touch the blades at the bottom of the sieve with the fingers. Danger of cuts!
∙ The appliance must not be used when the sieve or any other part is damaged.
∙ The appliance should not be used longer than 10 min in one piece.
Assembly:
∙ The motor base should be wiped with a damp cloth. All other parts can be rinsed
and dryed.
Attantion: In the sieve are sharp knives!
∙ Take care, that the switch is on position "0"
∙ Place the juice collector onto the motor base, the juice spout should be placed in
the curving of the motor base.
∙ Put the sieve into the juice collector. The 3 arrows at the bottom of the sieve should
point at the 3 recesses of the motor connector. Then press the sieve without force
at the edges on the motor base until you hear a slight click sound. Take care that
the sieve is not shaky.
∙ Put the lid on the juice collector and close the locking bow.
∙ Ensure that the locking bow is tightly closed.
∙ Place the pulp connector under the pulp ejection. The nose at the bottom must be
inserted into the motor base, else the appliance is not working. Hint: For a more
easy cleaning of the pulp container put a small plastic bag inside to collect the pulp.
∙ Place the juice collector under the spout.
Then plug in the appliance.
10