Safety Information; First Steps - Steba ZP 1 Mode D'emploi

This device is only for house­
hold use and not suitable for
gastronomy use. Carefully
read the instruction manual
first and keep it in a safe place.

Safety information

· Connect and operate the appliance only in
accordance with the specifications on the
rating plate.
This appliance is not intended for use by
∙
persons (including children) with reduced
physical, sensory, or mental capacities, or
lack of experience and knowledge, unless
they have been given supervision or instruc-
tion concerning use of the appliance by a
person responsible for their safety
Children should be supervised to ensure
∙
that they do not play with the appliance.
· After using the appliance or if the appliance
malfunctions, always pull out the plug.
· Never pull at the cord set. Do not chafe it over
edges or squeeze it.
· Keep the power supply cord away from hot
parts.
· Never leave the appliance unattended when
operating.
· Do not put anything on the apliance.
· Do not leave the apliance outdoors or in a
damp area.
· Never immerse the appliance in water.
· Do not operate the appliance if it is damaged
(for example if it felt down).
· The manufacturer is not liable for damage
occurred by using the apliance in another way
than described or if a mistake in operating has
been made.
· To prevent injury, repairs such as replacing a
damaged cord, should only be carried out by
customer service.
· The appliance is not suitable to be used with an
extenal timer or a separate remote control.

First steps

Wipe the appliance and the cones with a
damp cloth.
Take care, that the appliance is not plugged
in, as it could start with a pressure on the juice
cone.
4
Unwind the power cord from the cable sto-
rage.
Put the juice collector on the motor base. The
spout must be placed at the opening.
Put the sieve inside the juice collector box.
Attach the small juice cone (for e.g. lemon) on
the motor. Are there bigger fruits, e.g. oranges
or grapefruits, put the large juice cone over
the small juice cone
The appliance must be places on a stable and
flat surface. It must be taken care, that no hot
surfaces are near the appliance.
Usuage:
The juice cone must be chosen according
the size of the fruit. The fruit shall be cut into
halfes. The juicer starts by pressing the fruit
slightly on the cone. The juicer squeezes the
juice out of the fruit.
The juice is collected in the juice collector (ca
200ml). When the spout is moved downwards
the juice will run out of the spout in a glass,
which must be placed beneath the spout
before. Lift the spout for collecting the juice
again and put the lid on the top for storing.
The pulp is collected in the sieve.
It must be taken care, that the sieve gets not
jammed.
Never try to clean the sieve when the motor
is running. The juicer must be unplugged and
the sieve should be cleaned under running
water.
Cleaning:
Unplug the appliance always before cleaning.
Never immerse the motor base into water.
Danger of electrical shock!
All other parts should be cleaned with mild
soap water and possible with a brush. After
that all parts must be dried completely.
Take care that the juice cones are cleaned
from bellow, too, and that the sieve openings
are cleaned completely, too.
The motor base should be wiped with a damp
cloth.
The large juice cone can be removed from the
small juice cone by pressing the small cone at
the flat parts out of the large cone.