Télécharger Imprimer la page

HumanTechnik A-3240-0 Mode D'emploi page 9

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
We would like to congratulate you on
the purchase of our lisa RF time and
hope that it will serve you well for a
long time to come. You have chosen
a modern and reliable system.
Please read through the operating
instruction carefully to be able to start
the unit correctly and to familiarize
yourself with all of the system fea-
tures.
Standard components
Please check if all following compo-
nents are included:
- lisa RF time
- vibrating pad
- 230 V power supply unit
- Operating Instructions
- Warranty card
If any parts are missing please imme-
diately contact your dealer or the
manufacturer directly.
Operating principle
The lisa RF time alarm clock is an
electronic clock with an analog dial.
It is also a complete receiver for the
lisa radio transmitters. It possesses a
powerful vibrating pad, which alerts
you to a signal, as well as 6 LEDs
which indicate the type of signals
that are being received.
Installing the lisa RF time
Open the battery compartment of the
lisa RF time and remove the paper at
the + contact of the battery.
Connect the mains power supply unit
to the lisa RF time and plug into a
mains socket.
Time setting
Lightly pull the time and alarm setting
knob and turn it in the direction of the
arrow.
Warning: Pull the knob out carefully
and only turn it in the direction of the
arrow!
Alarm setting
Turn the time and alarm setting knob
in the direction of the arrow.
Switching on the alarm
Push the alarm On/Off button. When
you see the green marking the alarm
is on.
Switching on the sound
Push the sound On/Off button. When
you see the green marking the sound
is on.
Snooze Alarm
Touching the Light/Snooze Alarm/lisa
signal cancel switch will stop the
alarm and it will start again in appro-
ximately 5 minutes.
Face illumination (back light)
Touching the Light/Snooze Alarm/lisa
signal cancel switch will light the face
for approx 4 seconds.
Setting the correct radio channel
A special digital transmission process
ensures that the radio signals are
picked up without errors. This process
also makes it possible to set 10 diffe-
rent radio channels.
English 9

Publicité

loading