Important - DeWalt DW756 Guide D'utilisation

DW756,758/385498 8/20/01
7. Inspect the wheel for cracks, chips or any other visible damage
(other than normal wear) and discard if such damage is found.
Inspect the blotter for damage. If the blotter is missing or severely
damaged, replace it with a piece of thin cardboard or blotter paper
cut to the same size. NEVER USE A WHEEL WITHOUT A
BLOTTER.
8. Install the new wheel or other accessory. Be sure that both wheel
washers are in place (concave side toward the wheel) See Fig. 5.
For the DW756 see Fig 5 and 6.
FIG.5
ARBOR SHAFT
SPACER
WASHER
ACCESSORY
FIG.6
WASHER
NUT
7:43 AM Page 7
WASHER
NUT
WASHER
SPACER
ARBOR SHAFT
ACCESSORY
9. Hold as before and tighten the nut firmly but do not overtighten.
Overtightening can crack a grinding wheel.
10.Replace the wheel cover and its screws.
11.Adjust the spark guard to 1/16" from the wheel tighten securely.
12.Adjust the tool rest to 1/8" from the wheel and tighten securely.
13.Adjust the eye shield to a point between your eyes and the wheel.
The bench grinder is now ready for use.
14.Follow the above steps to install buffing wheels and wire wheel
brushes as well as grinding wheels.

Important!

To assure product safety and reliability, repairs, maintenance and
adjustment should be performed by D
Service Centers or other qualified service organizations, These
service organizations service DeWalt tools always using DeWalt
replacement parts.
Full Warranty
D WALT heavy duty industrial tools are warranted for one year from
E
date of purchase. We will repair, without charge, any defects due to
faulty materials or workmanship. For warranty repair information,
call 1-800-4-D WALT. This warranty does not apply to accessories or
E
damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may
have other rights which vary in certain states or provinces.
In addition to the warranty, D
E
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your
D WALT heavy duty industrial tool, simply return it to the participating
E
seller within 30 days for a full refund. Please return the complete unit,
transportation prepaid. Proof of purchase may be required.
7
Walt (U.S.) Inc. Industrial
E
WALT tools are covered by our: