Input Select Toggle - One for All URC-6540 Mode D'emploi

Input Select Toggle (F Key)
The F (Function) key is designed to select the input of
your HiFi. The Input Select Toggle allows you to use
the F (Function) key to cycle through your inputs.
If the F key is not changing the input:
1
Press and hold down MAGIC
MAGIC
until the light blinks twice (the
light will blink once then twice).
2 Press Programme -, Programme +,
Volume - (The light blinks twice).
The Input Select Toggle is now programmed.
Setting Up a CD Player, Mini-Disc Player or
Cassette Player
To program a CD Player, Mini-Disc Player, or Audio
Cassette Player use the following instructions.
Insert a CD, Mini-Disc, or Audio Cassette into the
appropriate player. Ensure that the output of your
Amplifier/Tuner is selected for the device that you
are going to program.
1 Press and release the CD, MD, or TAPE key.
Press and hold down MAGIC
2
MAGIC
until the red light blinks twice (the
light will blink once then twice).
3 Enter your 6-digit code
_ _ _ _ _ _
according to the chart below.
Codes are listed on pages 62-71.
The red light will blink twice.
VOL (+) = 1
VOL (-) = 2
CH (+) = 3
CH (-) = 4
Press PLAY to verify that you have
4
programmed the correct code.
WWW.ONEFORALL.COM
11