Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Overview of the components
1. Carrying handle
3. Filter push button
5. Power cord winding button
7. Floor attachment
9. Parking slot
11. Crevice nozzle
13. Power cable
Before using for the first time
1. Take the vacuum cleaner out of the packaging.
2. Check that the dust bag is correctly fitted.
3. Remove the packaging and check that the dust bag and safety filter are correctly fitted.
Operation
1. Place the vacuum cleaner in the horizontal position.
2. Insert the connection head of the suction hose into the
hose connector until it locks in place. To do so, please
press the buttons simultaneously. To release the hose
again, please press the buttons once more on the
connection head. Keep the buttons pressed down and
then pull out the hose.
3. Insert the vacuum tube into the handle if required and
then assemble the floor nozzle and/or the accessories.
4. Unwind the length of cable you require. To rewind the power cable, press the rewind
button with one hand, and guide the cable with the other hand to avoid wrapping.
CAUTION: Pull out the cable up to the maximum length indicated with the
YELLOW mark. Never pull the cable out up to the RED mark as the cable winding
can be damaged.
5. Insert the mains plug into a correctly installed power socket. Turn the device on by the
on/off switch by pressing down the button.
Instructions for use
2. Telescopic tube
4. Speed control button
6. Power ON/OFF switch
8. Floor attachment flap
10. Flexible hose
12. Dusting brush
14. Air discharge Filter HEPA
English
3
Publicité
Table des Matières
