Customer Service - ZWILLING J.A. Henckels FRESH & SAVE Manuel D'utilisation

US
The above prob-
The vacuum pump
lems cannot be
could be broken.
solved.
The pump stops
The pump sucked
during the vacuum
in liquids during
sealing process
the vacuum seal-
and does not turn
ing process.
back on.
12
Contact customer service.
Do not try to repair the pump
yourself.
Do not turn the pump upside
down. Shake the pump
slightly to remove any liquid.
Make sure the pump and the
charging station are com-
pletely dry. Plug the pump into
the charging station for one
second to reset, then remove
it and push the On/Off
button. Additional liquids may
drip out. Repeat this process
if the pump stops again.
Troubleshooting / Customer Service / Disposal

Customer Service

Please contact our customer service should you encounter any problems
with your vacuum pump. Detailed information on service, repairs and
warranty can be found at www.zwilling.com/service.
Disposal
Do not dispose of the appliance with household waste.
For an eco-friendly disposal, please return your old
appliance to a collection point for electrical appliances.
Separate collection of individual components of EE
helps to reduce
equip-ment
minimizes the danger
and
occur as a result of improper product disposal. In
addition, it enables reuse and recovery of the materials,
thus saving energy and raw materials.
environmental pollution
to humans, which may