Slow Mode - SEAL 80 Pro Manuel D'utilisation

5.2.3 Slow mode

Slow mode is selected and de-selected by pressing the slow mode button for 1 second.
Selection is indicated by the slow mode indication LED.
When selecting slow mode from normal forward mode, the speed (normal speed) will not
change until the footswitch is pressed.
Selecting slow mode speed in reverse direction is not posible.
Normal speed
Normal speed in slow mode is still determined by the speed control setting.
Switching between normal speed and standstill is done by the start and the stop button.
Pressing the reverse button will start rotation at normal speed in the reverse direction.
Slow mode speed
Slow mode speed is a fixed low speed (see specifications) independent from the speed
control. Slow mode speed can only be selected in slow mode by pressing and holding the
footswitch.
WARNING:
KEEP CLEAR OF THE NIP WHEN RUNNING AT SLOW MODE SPEED.
THE OPTICAL SAFETY DEVICE IS DISABLED.
When the footswitch is released, the slow forward rotation is stopped.
Changing to normal speed
To change from slow mode speed to normal speed without stopping, press and hold the
start button, release the footswitch and then release the start button.
Note:
Changing to normal speed will not deactivate slow mode.
Pressing the footswitch again will slow down rotation to slow mode speed again.
Operating 31