SEAL 80 Pro Manuel D'utilisation page 25

Safety indicator (3), LED;
The LED lights up when the beam of the optical safety device at the input side of
the nip is not interrupted.
Pressure indication (4), 4 LED's;
The LED's indicate the pressure setting of the main rollers. When 2 LED's light at
the same time, they indicate the tens in between. See specifications for actual
pressure range. All four LED's flashing indicates a pressure or nip setting error (see
section 5.1.4).
NIP setting indication (5), Pointer;
This mechanism is directly coupled with the nip control and indicates the distance
(nip) between the main rollers, set by the handwheel.
Slow mode (6), toggle pushbutton;
Press for 1 second to switch slow mode ON or OFF.
To run at the fixed slow mode speed the footswitch must be pressed.
CAUTION:
When slow mode is active the machine can still run at high speed.
Slow mode indication is NOT a speed indication. It is a working method.
Slow mode indicator (7), LED
The LED lights when slow mode is selected.
Stop (8), pushbutton;
Press to stop the rotation of the rolls.
Reverse (9), snap pushbutton;
Press and hold for rotation of the rolls in reverse direction.
Reverse indicator (10), LED;
The LED lights when the reverse mode is selected.
Speed control (11), control knob;
Sets the speed anywhere in a range between 0 and 10 (See specifications for
actual speed range).
Start (12), pushbutton;
Press to start the rotation of the rolls in the forward direction.
Forward indicator (13), LED;
The LED lights when the forward mode is selected.
Operating 23