Technical Data - Vetus FTR330/13 Instructions D'installation

er. An improperly sealed lid will result in air
sucked in by the sea water pump of the
engine which again will result in overheat-
ing of the engine.
To prevent damage of the water strainer,
during frost in the winter time, either the
water must be drained or the installation
must be filled with anti-freeze.
Remove the hoses to drain the strainer; the

Technical data

Material housing : Polypropylene GF
Material strainer
element : HD Polyethylene
Material lid : Styrol/Acrylnitrile SAN
Weight : 0.45 kg (1 lb)
Model Hose connection
FTR330/13 13 mm
FTR330/16 16 mm
FTR330/19 19 mm
FTR330/25 25 mm
FTR330/32 32 mm (1 1/4")
FTR33038 38 mm (1 1/2")
FTR330/38 38 mm (1 1/2")
Cooling water strainer model 330
Maximum capacity
l/min Imp.Gal/min US Gal/min l/min Imp.Gal/min US Gal/min
(1/2") 50 11
(5/8") 80 18
(3/4") 120 26
(1") 210 46
330 73
470 103
460 101
housing is not equipped with a drain plug.
Take care that during filling with anti-freeze
no anti-freeze is spilled into the waterway.
Anti-freeze is poisonous.
Max. ambient temperature : 75 °C (167°F)
Max. water temperature
Max. pressure
Recommended capacity
13 23
21 35
32 51
55 91
87 143
124 200
122 195
ENGLISH
: 55 °C (131°F)
: 0,5 bar
(50 kPa, 7 psi)
in normal use
5 6
8 9
11 13
20 24
31 38
44 53
43 51
5
3.0502